How many years will a serpentine belt last?
Thanks to improvements in rubber technology, serpentine belts last much longer than they did back in the day. Most serpentine belts generally last between 50,000 and 100,000 miles. Eventually, your car’s serpentine belt will wear down from continuous exposure to heat and friction and will need to be replaced.
When should a serpentine belt be changed?
Serpentine belts are built to last—much longer than before because of advancements in rubber technology. Under ideal conditions, a belt should stick with you for an average of 60,000 to 100,000 miles. Pretty impressive. However, some belts are manually tensioned and may need to be adjusted.
Is Replacing a serpentine belt expensive?
Typically, the serpentine belt itself is not expensive and cost you between $25 to $75. … However, the time to replace the belt might be longer in some vehicles, depending on how easy it is to access the belt and replace it. Therefore, expect to pay between $150 to $189 to replace your serpentine belt at a dealership.
What tools do you need to change a serpentine belt?
Snap a long-handled ratchet or a serpentine belt tool into the square 1/2-in. -drive or 3/8-in. -drive opening. Or use a socket on the hex-shaped protruding nut.
Does AutoZone replace serpentine belts?
A serpentine belt replacement is an essential part of routine auto maintenance, but it doesn’t have to be difficult. Get the parts you need from AutoZone.
How do I know if I need to replace my serpentine belt?
Symptoms of a Bad or Failing Serpentine/Drive Belt
- Squealing noise from the front of the vehicle. If you notice a squealing noise coming from the front of your vehicle, it could be from the serpentine belt. …
- Power steering and AC not working. If the serpentine belt completely fails and breaks, then your car will break down. …
- Engine overheating. …
- Cracks and wear on the belt.
What happens if the serpentine belt breaks while driving?
If a serpentine belt is broken, it can lead to a sudden loss of power assist for the steering system. … This happens because the serpentine belt keeps the water pump circulating coolant, also known as antifreeze, through the cooling system. This means that the engine can overheat anywhere, including the highway.
Will a new serpentine belt improve performance?
If your old belt was glazed and slipping, then yes. The new belt does not slip therefore everything is turning and generating at full capacity, hence the improvement you see. Not really. All of your accessories(power steering, air-conditioning, etc.)
Can a bad serpentine belt cause check engine light?
A loose or worn belt will cause ticking or rattling noises, poor engine performance and overheating, usually triggering the check engine light. If the timing belt breaks, the engine can’t run — and on some engines that break can cause internal damage.
Will AAA replace a serpentine belt?
For a little extra peace of mind, consider signing up for AAA Roadside Assistance. If you should find yourself on the roadside with a failed serpentine belt, flat tire or other vehicle emergency, our skilled problem solvers are available 24/7 to provide help at your location.
How far can you drive with a broken serpentine belt?
Like I mentioned previously without a serpentine belt to power the accessories of your car the car will start but you won’t be able to drive it that far. I’ve luckily never had this happen to me but I’d estimate that you would be able to drive for a few miles (3-5) before your car’s engine will start to overheat.
Does Jiffy Lube replace serpentine belts?
WHAT WE DO: Jiffy Lube® visually inspects the serpentine belt for fraying, splitting, glazing (the working edge of the belt becomes shiny from age and wear) or any other damage. If necessary, your Jiffy Lube® technicians remove the current serpentine belt and install a new one.
Is a serpentine belt the same as a timing belt?
When you pop the hood to check out your engine block, you should be able to see the serpentine belt, a thin, rubber belt that winds around several components in your engine, like a snake (hence ‘serpentine’). On the other hand, timing belts are deeper in the engine block and can’t be seen from the outside.
What causes a serpentine belt to break?
Serpentine belt problems usually result from one of three causes: a defective belt tensioner; misalignment of a pulley; or, defective bearings in the tensioner, idler, or one of accessories driven by the belt (including the water pump). … Excessive cracking: Other than severe old age, defective tensioner.